How can i verbs video metaphors from sony DCR-DVD908E to my macbook?I trayed to but i couldnt??
Answers:
Chris Villarin chrisvillarin.com Photographer Artist Web Designer Digital Video Effects Editing surrounded by Manila Philippines
I wrote this long answer, from years of experience editing. This is not copied from any website. Hope this helps!
TRANSFERRING VIDEO FROM CAMCORDER TO COMPUTER
Camcorders usually come near connecting cables. Older camcorders own yellow, red and white RCA cable that connect the camcorder to your TV or in this bag your computer. Newer camcorders have FIREWIRE connectors that conveniently connect to FIREWIRE connectors surrounded by newer computers be it PC or Mac.
FOR CAMCORDERS WITH RCA CONNECTORS & PROPRIETARY CONNECTIONS
If you are using a camcorder with RCA connectors afterwards your computer must have a Video Capture Card or any loving of video capturing device connected to your computer. A webcam is not a video occupation device.
RCA connectors/cables come in 3 colors, wan for video, red and white for left and right audio low. In some camcorders you will see the 3 outlets with the 3 colors. While other camcorders are provided next to a proprietary outlet that needs a proprietary cable beside RCA connectors on the other end of the cable. These cable usually come with the camcorder.
Make the connections on the camera and connect the RCA to the outlets of your Video Capture Card/device. Color codes on the RCA and the outlets are substantial. The yellow RCA is carry the video signal and should be connected to the "video in" outlet of the Video Capture Card/Device. The red and white RCA cables are the moved out and right audio signal. These can be swapped without any problems.
Sometimes the camcorder have a minijack or headphone jack for outputting sound. And, sometimes the Video Capture Card/Device also uses a minijack to invasion sound. If this is the satchel, only the pallid RCA cable needs to be connected both to the camcorder and the computer. Use a minijack to minijack connector cable to connect the camcorder and the computer. The minijack cable replaces the red and white RCA cable. There is such a piece as a "Y-Cable". The Y-Cable is a minijack on one end and 2 RCAs on the other termination. You can use this if the camcorder and the Video Capture Card/Device have different ways to connect audio signals. With adjectives these complexities you don't have to verbs about connecting the wrong cable because NOTHING WILL BE DAMAGED in armour you make a mistake.
Once the connections are done you are immediately ready to seizure the video on your computer. Video Capture Cards/Devices come with programs that allow you to seizure video to a location in your computer. Captured video files are most of the times surrounded by .avi or .mpg format stored in your computer.
FOR CAMCORDERS WITH FIREWIRE CONNECTOR OR (IEEE) 1394 CONNECTOR OR i.LINK
New camcorders and untried computers come with FIREWIRE or 1394 Connectors. These are more convenient to use. All you enjoy to do is connect just 1 Fireweire (1394) cable to the camcorder and the computer. Turn on your computer and receive sure all the programs that necessitate to load during startup hold been loaded. Connect the camcorder to the computer using the Firewire cable. Turn on your camera and set it to "play" mode. Not "record" or "camera" mode. Your computer should detect the camera and prompt you to start on the associated program. Open the program and look for the "capture" button.
CAPTURE SETTINGS
Leave everything on default and you should be OK. Once you seize the hang of it you can start tweaking some settings. Here are adjectives settings that you might want to experiment:
Resolution - this refers to the number of pixel. A 320x240 resolution means 320 pixels horizontally and 240 pixels vertically. 320x240 is the advise capturing resolution for youtube video. 352x240 is ideal for VCD. 640x480 is the just the thing resolution for full screen computer video. 720x480 is the ideal resolution for DVD.
Data Rate - refers to the amount of background allocated for capturing video(and audio). 300 kbps (kilobit per second) surrounded by mpeg-1 format is recommended for youtube. 1152 kbps in mpeg-1 format is for VCD. 2,000 kbps contained by mpeg-2 format is recommended for DVD. These numbers are here as reference. You will capture a low quality DVD if you record in 300 kbps mpeg-1. Commercial DVD background rate is 4500 kbps in mpeg-2 format. Data rate also determines the profile size of the captured video. The lower the facts rate the smaller the file.
Compression - MPEG 4 is for ipod video, MPEG 3 is for music, MPEG 2 is for DVD, MPEG 1 is for VCD. DV compression is the highest competence compression available to standard desktop/laptop computers. If you plan to capture a video for editing I suggest you appropriation in DV compression .avi directory.
MAKING DVDs
You make DVDs by burning the DVDs contained by a DVD burner drive. DVD+R and DVD-R are now interchangeable types. Most commercial DVD players can knob both types. Open your DVD burning program. Most of the time DVD burners come with programs to construct DVDs. Just follow the instructions on how to make DVDs and you're done! DO NOT PUT A miniDVD IN A SLOT LOADING OPTICAL DRIVE.
There are two ways:
1) If you get a drawer loading DVD drive (like those from LaCie), consequently you can rip the DVD using HandBrake.
http://www.lacie.com/us/products/family....
http://handbrake.fr/
2) If you get a Canopus Analog/Digital bridge from Canopus. Connect the camera to the A/D Bridge; connect the bridge to the computer.
http://canopus.com/products/videoconvers...
You will own to control the camcorder manually because iMovie (and FinalCut) cannot see the camera behind the A/D bridge.
Video capture by DVD based camcorders be never meant to be edited. The trait video you get from any method will be poor. USB will not work. This issue is NOT a computer problem - this is a DVD camcorder problem.
Hard Drive and flash memory are easier to connect and video quality is better than DVD base video.
The BEST and EASIEST method is to use a miniDV tape base camcorder and connect using a firewire cable. You Mac has a Firewire 400 port built-in (unless you are using a Mac Air - surrounded by which case, nearby is no firewire port). MiniDV tape continues to provide the best available video characteristic along with improve of use and has masses other advantages over the other storage media. If you can, pinch that DVD based camcorder pay for and replace it with a miniDV video based camcorder.