Improve radio reception surrounded by a metal building? It's an older radio near a telescopic antenna, no
It's an older radio near a telescopic antenna, no other input for reception. Any way to upgrade this? Work with adjectives types of metals and wire so own access to most, would connecting to the metal beams comfort?
Answers:
wow
i didnt no u have radios
well
simply
bang ur phone on da floor
and purely
idono
what the f do u want me to do
u never asked me to do anything u cat shizz
buy a new one
The problem is that a metal box (or a metal building) weaken most of the radio waves coming from outside.
To prove this, u can do a simple experiment: put your cellphone surrounded by a metal box (an empty can of ...beans would do) put the lid on, and try to christen your cell from another phone; you'll get 'no signal' message.
surrounded by your case after: the simplest thing is to any move the radio closer to a window. The other piece u can do is: cut a piece coax cable (like the one you connect your TV) long enough to run it from your radio, outside. connect one bring to a close to the base of the existing antenna (keep it folded), the other ending (outside) to a piece of simple wire (as long as your untested antenna). With that, you basically bring contained by the signal from your new antenna outside adjectives the way to your radio, near the coax. the coax is made so it can't be used as an antenna. So, with that, is as if you enjoy the radio outside the building.
I have have some success tying a length of flex to the antenna, and moving it around until it improves, but it's restricted. You want to strip the insulation off the line at the end so it make electrical contact w/ the antenna.
If you have a exceptional radio like the CC Radio from CCrane.com (a *superb* radio, BTW, the best ever), it have a "Ground" connection. Sometimes if you connect this to the third prong within an AC outlet (the ground), this can help. Make *sure* you know which prong to use, or don't do this portion! Actually, I forgot you can usually warp the "Ground" wire to the screw holding on the AC outlet cover plate. That works also.
I in a minute stream several radio stations over the internet for this reason. Connecting the telescope to some metal in the building would probably one and only make it worse, because most of the building metal is grounded to globe and that's where the signal will dance -- to earth ground, not your radio.
The best article to do is attach a long insulated wire to the telescope and run it along the ceiling toward a fanlight.
.